Date : 25th February 2011
Time : 8.30 am - 12.00 pm
Venue : Meeting Room, Cluster of Sustainable Engineering
Sunday, February 27, 2011
Monday, February 7, 2011
Syarahan Prof. Umemoto di PPK Bahan, USM Transkrian
Syarahan Prof. M. Umemoto daripada Toyohashi Institute of Technology, Jepun telah diadakan di Pusat Pengajian Kejuruteraan Bahan, USM Transkrian pada 31 Januari 2011. Prof. Umemoto telah menyampaikan syarahan bertajuk 'Nanostructure formation by surface and bulk severe plastic deformation'. Turut hadir di sesi syarahan ini adalah Prof. Dr. Shamsul Baharin Jamaludin dan Dr. Mazlee Mohd Noor daripada Pusat Pengajian Kejuruteraan Bahan, UniMAP.
Antara slide syarahan yang disampaikan.
Penerangan berkenaan mekanisme 'ball milling'.
Sesi bergambar 1 selepas syarahan: dari kanan: Prof. Dr. Shamsul Baharin Jamaludin, Prof. Dr. Radzali Othman (USM) aka RO, Prof. Umemoto dan Dr. Mazlee Mohd Noor.
Sesi bergambar 2 selepas syarahan.
Prof. Dr. Shamsul bersama rakan kerja lama di USM, En. Ahmad Badri (tengah) dan En. Mokhtar.
Kenangan mengusik jiwa 2 sahabat lama.
Sesi perbincangan informal sambil makan selepas syarahan.
Perbincangan masih rancak berlangsung.
Makan tengahari di Hotel Damai, Parit Buntar.
Perbincangan diteruskan selepas makan tengahari.
Friday, January 28, 2011
SUSTAINABLE ENGINEERING CLUSTER
1. PREFACE
In March 2005, Kolej Universiti Kejuruteraan Utara Malaysia has established seven research areas or clusters to foster a culture of research among academic staff. One of these clusters is sustainable engineering. This cluster is developed in order to maintain or improve the material and social conditions for human health and the environment. Sustainable engineering research cluster has carried out its research activities since the establishment of the Materials Engineering School in 2003. For a start, the cluster is working in parallel with the activities of Materials Engineering School and subsequently in collaboration with the Environmental Engineering School to conduct various researches such as recycling of materials, materials for construction and biomaterials. This cluster had obtained research grants from government sources and gained recognition through national and international exhibitions. Professor Dr Veena Sahajwalla (University of New South Wales Australia) has been appointed as an advisor for this cluster.
OBJECTIVES
To develop innovative methods of recycling and maximizing the use of industrial waste in the processing of new materials
To enhance the durability of available materials via developing alternative solutions for the processing method
To develop new sustainable processes and materials with innovation to increase durability
To develop an environment that is based on green technology
FOCUS AREAS
1. Fabrication, characterization and heat treatment of metal matrix composites
2. Fabrication and characterization of metallic biomaterials
3. Tribological study of metal and metal matrix composites
4. Polymer processing and characterization
5. Synthesis nanoferitte for electronic materials
5. Synthesis nanoferitte for electronic materials
6. Materials for construction
7. Extraction and separation of metals and alloys
8. Materials recycling
Currently, Sustainable Engineering Cluster consists of:
1. Structural Materials Group
2. Biomaterials Group
3. Electronic Materials Group
Currently, Sustainable Engineering Cluster consists of:
1. Structural Materials Group
2. Biomaterials Group
3. Electronic Materials Group
2. RESEARCH PROGRESS (2004-2009)
PUBLICATIONS (2004-2009)
Yeoh Cheow Keat, Shamsul Baharin Jamaludin, Zainal Ariffin Ahmad, “ The effect of varying process parameters on the microhardness and microstructure of Cu-Steel and Al-Al2O3 friction joints”, Jurnal Teknologi, Bil. 41 December 2004. pp 85-95.
Mazlee Mohd Noor, J.B.Shamsul, Bahan, “Nano Dan Aplikas”i, Dewan Kosmik, October 2003, page 21-23.
M.N. Mazlee and J.B. Shamsul, “Microstructure, properties and fracture mechanism of Al 2014 reinforced with alumina particles” Journal of Engineering Research and Education, Publisher KUKUM, pp45-53, 2004
Mazlee Mohd. Noor dan Prof. Madya Dr. Shamsul Baharin Jamaludin, Implan Aloi Titanium, Dewan Kosmik, Karangkraf Sdn. Bhd., Kuala Lumpur, November 2005, pp. 38-39
.
Khairel Rafezi Ahmad, Shamsul Baharin Jamaluddin, Luay Bakir Hussain & Zainal Ariffin Ahmad, “The Influence of Alumina Particle Size on Sintered Density and Hardness of Discontinuous Reinforced Aluminum Metal Matrix Composite”, Jurnal Teknologi, Bil. 42, 2005.
M.N. Mazlee, J.B. Shamsul, K.R. Ahmad, M.W.M. Fitri, C.M. Ruzaidi, “Fractography study of as-cast recycled aluminium cylinder heads”, Malaysian Journal of Microscopy, Vol. 2, pp. 42-47, 2005.
S. Saiful Azhar, A. Ghaniey Liew, D. Suhardy, K. Farizul Hafiz, M. D. Irfan, “Dye Removal from Aqueous Solution by Using Adsorption on Treated Sugarcane Bagasse”, American Journal of Applied Science 2 (11): 2005, 1499-1503
Md. Fazlul Bari, Bahruddin Saad, Ismail Abdur Rahman, Muhammad Idiris Saleh, “Extraction Mechanism of Gd3+ by BTMPPA, Journal of Alloys and Compounds “436 (2007) 187–194
M. Misbahul Amin and Khairel Rafezi Ahmad, Effect of Inhibitors on the Corrosion o AISI-1018 Steel in Seawater Environment, International Journal of Materials Science
M. N. Mazlee and J.B. Shamsul, Microstructure and damping properties of Al-Si-Mg/stainless steel composites produced via gravity casting technique, Malaysian Journal of Microscopy,
Saidatulakmar Shamsuddin, Shamsul Baharin Jamaludin, Zuhailawati Hussain, Zainal Arifin Ahmad, “Fabrication and characterization of powder metallurgy Fe-Cr-Al2O3 composites specified by reinforcement concentration”, Journal Physical Science, Vol. 19 (1), 89–95, 2008 USM
Y.C. Keat, S.B. Jamaludin and Z.A. Ahmad, “A Preliminary study on metal-metal bonding using friction welding technique”, Journal of The Institute of Materials Malaysia, Vol (4), January 2003, pp176-180.
Mohd Sobri Idris, Khairul Nizar Ismail, Shamsul Baharin Jamaludin, Che Mohd Ruzaidi Ghazali and Kamarudin Hussin, “Comparative Study of Clinker’s Transformation at Different Temperature Zone During Cement Production”, American Journal of Applied Sciences 4 (5): 328-332, 2007
Mohd Sobri Idris, Khairul Nizar Ismail, Shamsul Baharin Jamaludin, Che Mohd Ruzaidi Ghazali and Kamarudin Hussin, “Comparative Characterization of Clinker’s Microstructure “Different Temperature Zone during Cement Production”, American Journal of Applied Sciences 4 (8): 543-546, 2007
M.N. Mazlee, J.B. Shamsul & H. Kamarudin, “Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique”, American Journal of Applied Sciences 5 (6): 721-725, 2008
J.B. Shamsul, M.M. Hisyam,” Study of Spot Welding Of Austenitic Stainless Steel Type” 304, Journal of Applied Sciences Research, 3 (11): 1494-1499, 2007
J.B. Shamsul, A.Z. Nur Hidayah, C.M. Ruzaidi, “ Characterization of cobalt-chromium-HAP biomaterial for biomedical application”, Journal of Applied Sciences Research, 3 (11): 1544-1553, 2007
Shamsul Baharin Jamaludin, Zamri Yusoff, Khairel Rafezi Ahmad,” Corrosion Behavior Of AA2014/15 Vol%Al2o3p and AA2009/20 Vol% SiCw”, Portugaliae Electrochimica Acta, 26: 291-301, 2008
M.Misbahul Amin, Shamsul Baharin Jamaludin, Faizul Che Pa, Kong Kah Chuen, “Effects of magnesium sulfate attack on ordinary cement (OPC ) mortars”, Portugaliae Electrochimica Acta, 26: 235-242, 2008
J.B. Shamsul, A.Z. Nur Hidayah, C.M. Ruzaidi, “Fabrication and Properties of Cobalt-Chromium-HAP composite”, International Journal of Material Science, Research India Publication, Volume 3, Number 1, 25-31, 2008
J.B. Shamsul, A.Z. Nur Hidayah, C. M. Ruzaidi “Microstructure characterization of Cobalt-Chromium-HAP after corrosion test”, Journal of Ultra Chemisty-International Journal of Chemical Sciences, Vol. 4 (1), 39-42, 2008
Bari, F., Begum, N., Jamaludin, S. B., & Hussin, K. (2009). “Extraction and separation of Cu(II), Ni(II) and Zn(II) by sol-gel silica immobilized with Cyanex 272. Hydrometallurgy”, 96(1-2), 140-147.
Bari, F., Begum, N., Jamaludin, S. B., & Hussin, K. (2009).” Synthesis of sol-gel silica chemically bonded with cyanex 272 for the removal of Cu(II), Ni(II), and Zn(II)”. Journal of Materials Science, 1-9.
Bari, M. F., Hossain, M. S., Mujtaba, I. M., Jamaluddin, S. B., & Hussin, K. (2009). “Simultaneous extraction and separation of Cu(II), Zn(II), Fe(III ) and Ni(II) by polystyrene microcapsules coated with Cyanex 272. Hydrometallurgy”, 95(3-4), 308-315.
Zuhailawati, H., & Jamaludin, S. B. (2009). “Studies on Mechanical Alloying of Copper-Tungsten Carbide Composite for Spot Welding Electrode”, Journal of Materials Engineering and Performance, 1-6.
Tan F.P, M.Noraswadi, S.Aslamiyah, M.Azmi, M.Farid, J.B. Shamsul, M.W. M. Fitri and S. Rizam, Microstructure and hardness evaluation of car brake disc, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
K.A.Chua, A. Sharifudin, Yazief, M. Firdauz, M.Nazri, H. Saadiah, D.Ayu, J.B. Shamsul, M.W.M. Fitri, S. Rizam, Microstruture and hardness evaluation of Al-Si piston alloy, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
J. L. Wong, A. Linus, M. Radzi, M. Syamsul, N. Farhana, N. Azreen, J.B. Shamsul, M.W.M. Fitri, S. Rizam, Comparison studies for automotive exhaust valve and intake valve, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
A.Z. Nur Hidayah, J.B. Shamsul, C. M. Ruzaidi, A.Z. Ahmad Mujahid and A. M. Handy, Physical properties of cobalt implant composite, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
A.Z. Nur Hidayah, J.B. Shamsul, A.Z. Ahmad Mujahid, C. M. Ruzaidi and M.N. Mazlee, Fracture mechanism in cobalt implant composite, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
A.Z. Nur Hidayah, J.B. Shamsul, A.Z. Ahmad Mujahid and C. M. Ruzaidi, Corrosion study on cobalt implant composite, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
A.Z. Nur Hidayah, J.B. Shamsul, A.Z. Ahmad Mujahid, C. M. Ruzaidi, Y. Zamri, Microstructure of cobalt implant composite, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
Mohd. Ichwan Nasution, Shamsul Baharin Jamaludin, Che Mohd Ruzaidi Ghazali, Lee Liu Mei, Observation on products making process for small foundry shops in Medan and surroundings, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
M.N. Mazlee, J.B. Shamsul, K. Hussin, S.R. Shamsudin and M.F. Abdullah, Phase evolution in A356 alloys, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
Mohd Nazree Derman, Shamsul Baharin Jamaludin, Zainal Arifin Ahmad, Luay Bakir Hussain and Nurulakmal Mohd Sharif, The study of wear behaviour on PM aluminium and aluminium matrix composite reinforced with 15 wt % SaffilTM alumina short fibre, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
N.M Mohd Nan, M.Z Bukhari, J.B Shamsul and M.N.N Azira, Effect of temperature to the microstructure of Sn-Pb solder alloy, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
Y.B. Zamri, J.B. Shamsul and K.R. Ahmad, Corrosion behaviour of AA2014/Al2O3p and AA2009/SiCw in salt spray test, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
Y.B. Zamri, J.B. Shamsul and K.R. Ahmad, The hardness and resistivity studies of AMCs after artificial ageing, National Metallurgical Conference 2006 (NMC2006), 9th – 10th December 2006, Putra Palace Perlis. CD
M. N. Ichwan, J. B. Shamsul, C. M. Ruzaidi and C. P. Faizul, Role Of SiO2 On Mold Making Process In Foundry Metallurgy, Mineral Symposium 2007 (SIMPOMIN 2007) Advancing Malaysian Mineral Industries Through R & D, 3-5 September 2007, Lumut Perak, CD
M.M. Amin, J.B. Shamsul, C.M. Ruzaidi, K.R. Ahmad, Hot corrosion behaviour of austenitic steel-303 in molten chloride and carbonate salts, National Metallurgical Conference 2007 (NMC2007), 26th -27th November 2007, Johor Bahru.
C.D. Zuraidawani, J.B. Shamsul and A.Z. Nur Hidayah, Characterization Of Cobalt F-75 Powder For Biomedical Application, National Metallurgical Conference 2007 (NMC2007), 26th -27th November 2007, Johor Bahru.
Saidatulakmar Shamsuddin, Shamsul Baharin Jamaludin, Zuhailawati Hussain, Zainal Arifin Ahmad, Compaction Study of Particulate Iron-Chromium Matrix Composite Reinforced with Alumina, National Metallurgical Conference 2007 (NMC2007), 26th -27th November 2007, Johor Bahru.
Saidatulakmar Shamsuddin, Shamsul Baharin Jamaluddin, Zuhailawati Hussain, Zainal Ariffin Ahmad. (29 Mei – 1 Jun, 2007) Influence of Binder in Iron Matrix Composites. In Proceeding of the International Conference on Advance Materials and Nanotechnology. Langkawi, Malaysia.
Saidatulakmar Shamsuddin, Shamsul Baharin Jamaluddin, Zuhailawati Hussain, Zainal Ariffin Ahmad. (27-29 Nov, 2007) Preliminary study of iron-chromium matrix composite reinforced with alumina. In Proceeding of the 23rd Regional Conference on Solid State Science and Technology 2007. Johor Bahru, Johor, Malaysia.
Saidatulakmar Shamsuddin, Shamsul Baharin Jamaluddin, Zuhailawati Hussain, Zainal Ariffin Ahmad. (10-12 Dec, 2007) Microstructure and Hardness Properties of Fe-Cr-Al2O3 Composites. In Proceeding of the 6th Asean Microscopy Conference 2007. Cherating, Pahang, Malaysia.
Saidatulakmar Shamsuddin, Shamsul Baharin Jamaluddin, Zuhailawati Hussain, Zainal Ariffin Ahmad. (30 Nov – 2 Dis, 2008) The Characteristics of vacuum sintered Fe-Cr-Al2O3 Composites. Port Dickson, Negri Sembilan, Malaysia.
Saidatulakmar Shamsuddin, Shamsul Baharin Jamaluddin, Zuhailawati Hussain, Zainal Ariffin Ahmad. (2-4 Dis, 2008) Effect of Particle Size on Fe-Cr-Al2O3 Metal Matrix Composite. In Proceeding of Malaysian Metallurgical Conference 2008. Bangi, Selangor, Malaysia.
Saidatulakmar Shamsuddin, Shamsul Baharin Jamaluddin, Zuhailawati Hussain, Zainal Ariffin Ahmad. (2010) Influence of Binder in Iron Matrix Composites. American Institute of Physics Conference Proceedings. 1217, 419-423.
Saidatulakmar Shamsuddin, Shamsul Baharin Jamaluddin, Zuhailawati Hussain, Zainal Ariffin Ahmad. (9-10 June, 2010) Heating Rate Effects on Properties of Powder Metallurgy Fe-Cr-Al2O3 Composites. In Proceeding of the International Conference on X-rays & Related Techniques in Research & Industry. Langkawi, Malaysia.
Zuraidawani, J.B. Shamsul, Fazlul Bari, The effect of stearic acid on powder metallurgy cobalt F-75, Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 15-16 Mac 2008, Organised by UNIMAP, Perlis
M.N. Mazlee, J.B. Shamsul, H. Kamarudin, Damping and microstructure studies of as-received and die cast A356 alloys, National Metallurgical Conference 2007 (NMC2007), 26th -27th November 2007, Johor Bahru.
Md Fazlul Bari, Md Sohrab Hossain, Shamsul Baharin Jamaludin, Statistical optimization of copper, zinc, iron and nickel extraction from sulphate solution using microcapsules coated with Cyanex 272. Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 15-16 Mac 2008, Organised by UNIMAP, Perlis
Md Fazlul Bari, Noorzahan Begum, Shamsul Baharin Jamaludin, Recovery of metals (copper, Nickel and Zinc) from the leach liquor by solvent extraction, Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 15-16 Mac 2008, Organised by UNIMAP, Perlis
M. N. Mazlee, J. B. Shamsul, M. Z. Bukhari and H. Kamarudin, Damping capacity study at elevated temperatures of asreceived and as-cast Al-Si-Mg alloys, Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 15-16 Mac 2008, Organised by UNIMAP, Perlis
Mohd Ichwan Nasution, Mohd Nasir Zainal Arif, Che Mohd Ruzaidi Ghazali, Shamsul Baharin Jamaludin, Faizul Che Pa, Lee Liu Mei, New approach to aluminium polymer alloys, Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 15-16 Mac 2008, Organised by UNIMAP, Perlis
Normah Cheman, Mohd Nazree Derman, Nur Maizatul Shima Adzali, Shamsul Baharin Jamaludin, The fabrication and properties of PM AL-MG composites reinforced with short fibre alumina, Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 15-16 Mac 2008, Organised by UNIMAP, Perlis
A M Rohaya, J.B. Shamsul, S. Rizam, Preliminary study of stearic acid mixed with F75 to measure density and porosity, Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 15-16 Mac 2008, Organised by UNIMAP, Perlis
Md Fazlul Bari, Shamsul Baharin Jamaludin, Kamarudin Hussin, Noorzahan Begum (2009), Hydrophobic silica nanotube immobilized with Cyanex 272 for the extraction of metal ions, CD Proceeding of Malaysian Universities Conferences on Engineering and Technology (MUCET)
Mazlee Mohd Noor, Shamsul Baharin Jamaludin, Mohabattul Zaman SNS Bukhari, Kamarudin Hussin (2009) Production of Al-Si-Mg alloy reinforced with stainless steel, CD Proceeding of Engineering Postgraduate Conference (EPC)
C. M. Ruzaidi, J.B. Shamsul, H. Kamarudin, K.A. Asma, A.M. Radzi (2009) Physical properties and morphology of aluminium filled phenolic, CD Proceeding of Engineering Postgraduate Conference (EPC)
Md Fazlul Bari, Mst. Noorzahan Begum, Shamsul Baharin Jamaludin, Kamarudin Hussin (2009) Selective Leaching For The Recovery of Copper From PCB, CD Proceeding of Malaysian Metallurgical Conference (MMC 09)
Nurhidayah Ahmad Zaidi, Shamsul Baharin, Ahmad Mujahid Ahmad Zaidi, Handy Ali Munir, Ahmad Firdaus Ahmad Zaidi, Process of Cobalt Implant Composite [CIC] Fabrication, 4th International Conference 2006- The Malaysian Research Group of United Kingdom, at University Salford, 19 -21 June 2006. pp516.
M.N. Mazlee, A. Syayuthi, H. Esah, J.B. Shamsul, M.Z. Bukhari, Stress corrosion cracking study of Un-aged and artificial aged Al 6063 alloy, IXCRI 2006.
Nur Maizatul Shima, Teh Peh Hean, J.B. Shamsul, Fabrication and properties of aluminum graphite composite produced by powder metallurgy method. IXCRI 2006.
Mohd Sobri Idris, Che Mohd Ruzaidi Ghazali, Shamsul Baharin Jamaludin, Kamarudin Hussin, Khairul Nizar Ismail, A study of clinker microstructure using scanning electron microscope, IXRI 2006.
Khairel Rafezi Ahmad, M. W. M Fitri, M. N. Mazlee1, J. B. Shamsul, Zainal Arifin Ahmad, The effect of Al2O3 particle size on the microstructure of composite Al fabricated by powder metallurgy, IXCRI 2006.
Kamarudin Hussin, Shamsul Baharin Jamaludin, Che Mohd Ruzaidi Ghazali, Mohd Sobri Idris, Mohd Nazry Salleh, Mohabattul Zaman, Khairul Nizar Ismail, The Development of Artificial Marble Made of Dolomite in Malaysia, SOHN International Conference Incorporating the 4th International Symposium on Sulfide Smelting, August 27-31 2006, Catamaran Resort San Diego California, USA, organized by TMS and SME,
Khairel Rafezi Ahmad, Wong Jing Lee, Ruhiyuddin Mohd Zaki, M.N. Mazlee, M.W.M. Fitri, S.S. Rizam and J.B. Shamsul, The Microstructure And Properties Of Aluminium Composite Reinforced With 65 µm Alumina Particles Via Powder Metallurgy, 1st International Conference on Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 165-167.
Shamsul Baharin Jamaludin, Zamri Yusoff, Khairel Rafezi Ahmad, Ageing Characteristics Of AA2009/20vol.%Sicw and AA2014/15vol.%Al2O3p Metal Matrix Composites, 1st International Conference on Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 168-170.
S.S. Rizam, M.W.M. Fitri, M.N. Mazlee, J.B. Shamsul, K. R. Ahmad, M.Z. Ruhiyudin, A.G.B. Syamsul, M. Harun, Y. Hafizal, Effect Of Particle Coating On Matrix-Reinforcement Bonding, 1st International Conference on Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 174-177.
M.N. Mazlee, J.B. Shamsul, K. Hussin, S.S. Rizam, K. Ismail, Preliminary Microstructure And Hardness Studies Of A356/Stainless Steel Composite Via Gravity Die Casting Technique, 1st International Conference on Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 195-197.
J.B. Shamsul, A.R. Noor Ashiqin, S.S. Rizam, M.W.M. Fitri, K. Azmi, The Effect Of Milling Time On Microstructure and Hardness Of The Aluminium Silicon Carbide (Al-10 Wt % SiCp) Composite 1st International Conference On Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 205-207.
A.Z. Nur Hidayah, J.B. Shamsul, C. M. Ruzaidi, A.Z. Ahmad Mujahid, Mechanical Properties Of Cobalt Implant Composite, 1st International Conference On Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 215-219.
N.M Mohd Nan, M.Z Bukhari, J.B Shamsul, M.N.N Azira And A.N Azwin, Mechanical Properties and Microstructural For Various Types Of Solder Alloys, 1st International Conference On Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 220-222.
D.Murizam and J.B. Shamsul, Effect Of Solution Treatment Temperature On Recycled Aluminium Alloy 319, 1st International Conference On Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 226-228.
J.B. Shamsul, M.M. Hisyam, S.S. Rizam, D. Murizam, M.W.M. Fitri, Study Of Spot Welding Of Austenitic Stainless Steel Type 304, 1st International Conference On Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 229-230.
Md Fazlul Bari, Mst. Noorzahan Begum, Shamsul Baharin Jamaludin, Kamarudin Hussin,
Extraction And Separation Of Metals (Cu2+, Ni2+, Zn2+ From Their Sulphate Solutions By Bis (2,4,4- Trimethylpentyl) Phosphinic Acid (Cyanex 272), 1st International Conference On Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 239-241.
Md Fazlul Bari, Md.Sohrab Hossain, Shamsul Baharin Jamaludin, Kamarudin Hussin, Extraction And Separation Behavior Of Metal Ions (Cu2+, Zn2+ and Fe3+) Using Microcapsules Coated Cyanex 272 In Column Packed, 1st International Conference On Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 242-245.
S.S. Rizam, M.N. Mazlee, J.B. Shamsul, M.W.M. Fitri, M.Z. Ruhiyudin, K.R Ahmad, A.G.B. Syamsul, M. Harun, Y. Hafizal, Effect Of Colloidal SiO2 Content On The Morphology Of Coated Ceramic Particles 1st International Conference On Sustainable Materials (ICoSM2007), 9th – 11th June 2007, 265-267.
Zamri Yusof, Shamsul Baharin Jamaludin, Developing a mathematical model to evaluate wear coefficient of aluminum/slag powder metallurgy composites, CD Proceeding, RCAEM 2-3 Jun 2010 Penang
Zamri Yusof, Shamsul Baharin Jamaludin, Correlation and contribution of synergy factors on abrasive wear behavior of slag/aluminum composite using statistical analysis, CD Proceeding, RCAEM 2-3 Jun 2010 Penang
Saidatulakmar Shamsuddin, Shamsul Baharin Jamaludin, Zuhailawati Hussain, Zainal Arifin Ahmad, Heating Rate Effects on Properties of Powder Metallurgy Fe-Cr-Al2O3 Composites, Proceedings of ICXRI 2010, International Conference on X-Rays & Related Techniques in Research & Industry June 9 – 10, 2010, Aseania Resort Langkawi, Malaysia.
Zuraidawani Che Daud, Shamsul Baharin Jamaludin, Fazlul Bari, Characterization of Co-Cr-Mo (F-75) alloy produced by solid state sintering, Proceedings of ICXRI 2010, International Conference on X-Rays & Related Techniques in Research & Industry June 9 – 10, 2010, Aseania Resort Langkawi, Malaysia.
Raudhah Othman, Shamsul Baharin Jamaludin, Mohd Nazree Derman, The corrosion study of Co-Cr-Ni alloy fabricated by powder metallurgy, Proceedings of ICXRI 2010, International Conference on X-Rays & Related Techniques in Research & Industry June 9 – 10, 2010, Aseania Resort Langkawi, Malaysia.
Noorazimah , A.Z. Nur Hidayah, J.B. Shamsul, Fabrication of functionally graded materials from Hydroxyapatite and F75 Cobalt alloy, Proceedings of ICXRI 2010, International Conference on X-Rays & Related Techniques in Research & Industry June 9 – 10, 2010, Aseania Resort Langkawi, Malaysia.
Mohd Radzi Ali, Shamsul Baharin Jamaludin, C.M. Ruzaidi ,A.Z. Nur Hidayah, A.Alida, Preliminary study on the physical properties of palm ash and PCB waste mixed with phenolic resin. Proceedings of ICXRI 2010, International Conference on X-Rays & Related Techniques in Research & Industry June 9 – 10, 2010, Aseania Resort Langkawi, Malaysia.
A.M. Rohaya, J. B. Shamsul, S. R. Shaiful, The Effect of F-75 Alloy Mixed with HAP on Microstructure in Corrosion Test for Biomaterial Applications, Proceedings of ICXRI 2010, International Conference on X-Rays & Related Techniques in Research & Industry June 9 – 10, 2010, Aseania Resort Langkawi, Malaysia
Alida Abdullah, Shamsul Baharin Jamaludin, Mazlee Mohd Noor, Development of Coconut Fiber with the Addition of Fly Ash for Cement Panel Application in Construction, Proceedings of the International Postgraduate Conference on Engineering (IPCE 2010) 16 - 17 October 2010, Perlis, Malaysia
Noorazimah Mohd Ab Llah, Shamsul Baharin Jamaludin, Nur Hidayah Ahmad Zaidi, Physical properties of FG HAP-F75 fabricated by powder metallurgy, Proceedings of the International Postgraduate Conference on Engineering (IPCE 2010) 16 - 17 October 2010, Perlis, Malaysia
Noorsyakirah Abdulah, Shamsul Baharin Jamaludin, Mohd Afian Omar, Debinding Study of Injection Molded CoCrMo Alloy Powder Using Palm Based Binder System, Proceedings of the International Postgraduate Conference on Engineering (IPCE 2010) 16 - 17 October 2010, Perlis, Malaysia
Nurul Razliana Abdul Razak, Suryadiansyah, Shamsul Baharin Jamaludin, Microstructure of aluminium-magnesium trisilicate (M-T-S) and aluminium zinc oxide (ZnO) composite by using powder metallurgy method, Proceedings of the International Postgraduate Conference on Engineering (IPCE 2010) 16 - 17 October 2010, Perlis, Malaysia
Zamri Yusoff, Shamsul Baharin Jamaludin , Misbahul Amin, An Examination of the Evidence of Abrasive Wear in the Wearing Process of Aluminium Reinforced with Slag Particles using SEM, Proceedings of the International Postgraduate Conference on Engineering (IPCE 2010)
16 - 17 October 2010, Perlis, Malaysia
Zamri Yusoff , Shamsul Baharin Jamaludin, Misbahul Amin, Tribology and Wear Theory of Aluminium Composites: Review and Discussion, Proceedings of the International Postgraduate Conference on Engineering (IPCE 2010) 16 - 17 October 2010, Perlis, Malaysia
Zuraidawani Che Daud, Shamsul Baharin Jamaludin and Fazlul Bari, Microstructure and properties of Co-Cr-Mo alloy as a function of isothermal holding time, Proceedings of the International Postgraduate Conference on Engineering (IPCE 2010) 16 - 17 October 2010, Perlis, Malaysia
Shamsul Baharin Jamaludin, Zuraidawani Che Daud, Fazlul Bari, Solid state sintering of Co-Cr-Mo (F 75): Microstructure and proeprties, Proceeding of 4th Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010, 22-23 November 2010 Park Royal Penang
M. N. Mazlee, J. B. Shamsul and S. Ayusnida, interfacial reaction layer and tensile shear strength of ai 6063 alloy/stainless steel 316L spot welded joint, Proceeding of 4th Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010, 22-23 November 2010 Park Royal Penang
D. Zuraidawani, J. B. Shamsul, and F. Bari, Corrosion behaviour of Co-Cr-Mo alloys fabricated by powder metallurgy route, Proceeding of 4th Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010, 22-23 November 2010 Park Royal Penang
Noorazimah, J.B. Shamsul, A.Z. Nur Hidayah, Microstructure study on functionally graded HAP-F75 fabricated by powder metallurgy, Proceeding of 4th Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010, 22-23 November 2010 Park Royal Penang
Nur Maizatul Shima Adzali, Shamsul Baharin Jamaludin, Mohd Nazree Derman, Nur Hidayah Ahmad preliminary study of hap addition to co-cr-mo alloy fabricated by powder metallurgy method, Proceeding of 4th Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010, 22-23 November 2010 Park Royal Penang
M.N. Ichwan, J.B.Shamsul, Su Wee Seng, Mechanical properties and its microstructure of binary aluminium-stannum alloys products with varying composition, Proceeding of 4th Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010, 22-23 November 2010 Park Royal Penang
D.N. Rohadiana, Z.A.Z, Jamal, F. Md Bari, J.B. Shamsul, Characterization of Ni 0.5 Lix Zn(0.5-x)Fe2O4 synthesized by co-precipitation method, Proceeding of 4th Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010, 22-23 November 2010 Park Royal Penang
RESEARCH GRANTS AWARDED
No | Grand | Name of Research Grant | Title of Research | Amount of Grants Approved (RM) | |
1 | University’s Grant | Short Term Grant ( | Production of aluminium composite from recycle automotive component. | RM20,000 | |
2 | University’s Grant | Short Term Grant ( | Study of clinker microstructure during cement production | RM10,000 | |
3 | University’s Grant | Short Term Grant ( | Preliminary investigation of processing cobalt alloys reinforced with ceramic particles for improved surgical implants by powder metallurgy route | RM20,000 | |
4 | Government Agencies Grant | IRPA – MOSTE/Ministry of science | Synthesis and properties of hard and wear resistance materials for industrial application | RM99,000 | |
5 | Government Agencies Grant | IRPA (Long term) | Development and performance of ceramics-metal bonding to improve structural materials | RM211,600 | |
6 | University’s Grant | Short Term Grant ( | Characterization of “batu reput” in Perlis State and its application | RM30,000 | |
7 | University’s Grant | Short Term Grant ( | Performance Evaluation of Aluminium Composite from Recycled Automotive Component | RM30,000 | |
8 | University’s Grant | Short Term Grant ( | Study of Aqueous Corrosion Behaviour on the Metal Matrix Composite | RM20,000 | |
9 | University’s Grant | Short Term Grant ( | Preliminary Study on Recycling of Machining Steel Chip by Powder Metallurgy Method | RM16,794 | |
10 | UiTM | Short term | Development and Production of Uniformly Distributed Alumina Particles in Iron Based Metal Matrix Composite Using a Powder Metallurgy Method | RM18,000 | |
11 | University’s Grant | Short Term Grant ( | A study of lead free solder for electronic application | RM24,000 | |
12 | University’s Grant | Short Term Grant ( | Printed circuit board recycling | RM24,000 | |
13 | University’s Grant | Short Term Grant ( | Performance evaluation cobalt implant composite | RM20,000 | |
14 | University’s Grant | Short Term Grant ( | Kinetics of Sm ( | RM16,700 | |
15 | Government Agencies Grant | MOSTE under sciencefund | Synthesis and properties of cobalt-chromium-molybdenum bio-compatible materials for bio-medical application | RM179,000 | |
16 | Government Agencies Grant | MOSTE under science fund | Development of sintered hardmetal alloy from sub-micron powder particle for mechanical seal and wear resistant application through Powder Metallurgy routes | RM401,500 | |
17 | Government Agencies Grant | Ministry of Higher Education under fundamental grant | Fundamental study of age hardening behaviour in aluminium-copper matrix composite system PURPOSE Fundamental | RM15,000 | |
18 | Government Agencies Grant | Ministry of Higher Education under fundamental grant | Chemical structural and thermal characterization of cellulose and fiber from rice straw and rice husk | RM15,000 | |
19 | Government Agencies Grant | Ministry of Higher Education under fundamental grant | Mass transfer kinetics of metal ions by mixed organophosporus extractant PURPOSE Fundamental | RM80,000 | |
20 | Government Agencies Grant | Ministry of Higher Education under fundamental grant | Study and fabrication of iron matrix composite for gear application PURPOSE Fundamental | RM40,000 | |
21 | Government Agencies Grant | Ministry of Higher Education under fundamental grant | Fundamental study of corrosion behaviour PM aluminium matrix composite System PURPOSE Fundamental | RM80,000 | |
22 | Government Agencies Grant | MOSTE under sciencefund | Development of Cost Effective Cement Matrix Composites PURPOSE Product Development | RM154,000 | |
23 | Government Agencies Grant | MOSTE under sciencefund | Studies on the production and properties of metal filled polymer as high filler loading composites | RM266,000 | |
24 | Government Agencies Grant | MOSTE under sciencefund | Development of bio-friendly sacrificial anode from magnesium alloys for underground structure corrosion protection | RM200,805 | |
25 | Government Agencies Grant | MOSTE under sciencefund | Nano - structural electrodes via deformation approach to enhance spot welding capability in automobile industries | RM100,805 | |
26 | Government Agencies Grant | MOSTE under sciencefund | The Study Of Reaction Mechanism Of Silicon Carbide (SiC) Production From. | RM90,000 | |
27 | Government Agencies Grant | Ministry of Higher Education under fundamental gran | Fundamental Study of The Interaction behaviour between Silicate sand and Bentonite in green sand mold for Zn Alloy Casting | RM67,000 | |
28 | Government Agencies Grant | Science Fund (Ministry of Agriculture) | Development of coconut fibre with the addition of fly ash for cement panel application in construction | RM114,000 |
RESEARCH AWARDS
No | Name of Exhibition | Title of the product | Medal | |
1 | IPTA Research Exhibition 2005 | KUKUM Artificial Marble | SILVER | |
2 | IPTA Research Exhibition 2005 | Cobalt Implant Composite | BRONZE | |
3 | IPTA Research Exhibition 2005 | Composite Pulley | BRONZE | |
4 | KUKUM Impreg Wood | SILVER | ||
5 | Recycled Aluminium Composite Pulley | SILVER | ||
6 | Metal Implant | BRONZE | ||
7 | Concrete Ceramic Waste Slab | BRONZE | ||
8 | Microcapsule With Functional Group For Diverse Application | BRONZE | ||
9 | International Exhibition Geneva, Switzerland 2006 | KUKUM Artificial Marble | GOLD | |
10 | Composite Products From Palm Ash Waste | |||
11 | Clay Filled Aluminum Product | |||
12 | Development Of Barium Strontium Titanate (BST) Based Sensors/Instrument | SILVER | ||
13 | Sphogsorb: Biodegraddable Adsorbent For Oil And Grease Trap | SILVER | ||
14 | Recycling Engineering Of PCBs For Copper Recovery | SILVER | ||
15 | PC (Polystyrene Concrete) | SILVER | ||
16 | Supasorb Adsorbents For Treatment Of Dyes polluted Wastewater | BRONZE | ||
17 | Kayan 1: A Particle Board From Rice Husk | |||
18 | Portable Aerohub-UniMAP Fire Fighter | BRONZE | ||
19 | International Exhibition Geneva, Swirtzerland 2007 | The Production of Light Weight Aggregates From Local Waste | ||
20 | International Exhibition Geneva, Swirtzerland 2007 | Recycled Aluminium Composite Pulley | BRONZE | |
21 | International Exhibition Geneva, Swirtzerland 2007 | UniMAP Impreg Wood | BRONZE | |
22 | Malaysian Technology Expo (MTE) 2007 | Easy Fix Concrete Block | SILVER | |
22 | Malaysian Technology Expo (MTE) 2007 | Easy Fix Concrete Block | SILVER | |
23 | Pameran Ekspo Rekacipta UniMAP 2008 | KAYAN 2: A Panel Board From Rice Straw | ||
24 | Pameran Ekspo Rekacipta UniMAP 2008 | Modified Polymer Artificial Aggregates | ||
25 | Pameran Ekspo Rekacipta UniMAP 2008 | Agro Fiber Deco Panel | ||
26 | Pameran Ekspo Rekacipta UniMAP 2008 | Domigrease-Grease From Dolomite | SILVER | |
27 | Pameran Ekspo Rekacipta UniMAP 2008 | Virgin Coconut Oil and Derivatives | BRONZE | |
28 | Pameran Ekspo Rekacipta UniMAP 2008 | Silica Nono-Tube Immobilized With Cyanex 272 For Environmental Application | BRONZE | |
29 | Malaysian Technology Expo (MTE) 2008 | Décor Polymer Concrete (DPC), | BRONZE | |
30 | Malaysian Technology Expo (MTE) 2008 | New Approach to Aluminium Polymer | BRONZE | |
31 | KAYAN 2: A Panel Board From Rice Straw | SILVER | ||
32 | Modified Polymer Artificial Aggregates | SILVER | ||
33 | Silica Nono-Tube Immobilized With Cyanex 272 For Environmental Application | SILVER | ||
34 | Agro Fiber Deco Panel | SILVER | ||
35 | Domigrease-Grease From Dolomite | SILVER | ||
36 | International Trade Fair Ideas Inventions New Products (IENA). Nuremberg, German, 2008 | Décor Polymer Concrete (DPC) | SILVER | |
37 | International Trade Fair Ideas Inventions New Products (IENA). Nuremberg, German, 2008 | Modified Polymer Artificial Aggregates | SILVER | |
38 | EUREKA INNOVA, 2008 | KAYAN 1: A Panel Board From Rice Husk | ||
39 | Award Exhibitin SIIF, 2008 | Clay Filled Aluminium Product | ||
40 | The Pecipta 2009 | GeoCRETE: A Novel Concrete Without Cement | ||
41 | The Pecipta 2009 | Aluminium filled polymer via casting technique | SILVER | |
42 | Agro Fiber Composite Panel | SILVER | ||
43 | Modified Artificial Aggregate from Polymer Waste for Non-Structural Concrete | BRONZE | ||
44 | International Trade Fair Ideas Inventions New Products (IENA). Nuremberg, German, 2009 | Kayan 2 : A Panel Board From Rice Straw | BRONZE | |
45 | International Trade Fair Ideas Inventions New Products (IENA). Nuremberg, German, 2009 | Domigrease-Grease From Dolomite | BRONZE | |
46 | PAMERAN | Silica NanoTube |
Subscribe to:
Posts (Atom)